top of page

WSL-2300 Phelios AL 
Multimode microplate reader for multi-purpose

Phelios AL is a compact multimode microplate reader for measuring absorbance (ABS), kinetics, spectrum, area scan, in the wavelength range of 200 to 999 nm, and luminescence (LUMI), which is also avairable to measure microvolume samples (NANO: 2µL) with Nano Volume Plate.
It is a multi-plate format compatible with 6/12/24/48/96/384 well plates. If you use the "Quantitative analysis mode" that analyzes quantitatively, calibration curve creation and concentration conversion are automatically performed at the same time as the measurement, and the analysis results can be saved in "Excel" format.
In addition, if you use the "Qualitative mode" for qualitative analysis, you can determine whether the target molecule is positive or negative by setting the cutoff value. In addition, the optional "Nano Volume plate" enables absorbance / spectral measurements of 24 samples in a volume of 2 µL.
Absorbance: Photodiode / Luminescence︓PMT 
Wavelength range
Absorbance:200 ~ 999nm / Luminescence︓300 ~ 700nm (MAX 420nm)
Wavelength selection
Monochrometer (1nm increments)
Light Source
Absorbance:Xenon fl ash / Luminescence︓None
Plate type
6/12/24/48/96/384 well plate / Nano volume plate (3 × 8: 24 samples)
Measurement mode
《Absorbance(ABS)》Endpoint (6 wavelength / analyze), Kinetics, Spectrum, Well-area scan 《Luminescence(LUMI)》Endpoint, Kinetics 《Microvolume (NANO)》Endpoint, Spectrum
Number of wavelength
《Absorbance》6 wavelength(Analysis mode is 1 wavelength setting only)
Detection sensitivity
Absorbance︓0 ~ 4.0 O.D. Luminescence︓10-18mole ATP(Dynamic range > 8 decades)
《Accuracy》 0.000 ~ 2.000 O.D. : ± 1%(± 0.010) 《Linearity》  0.000 ~ 2.000 O.D. : ± 1%(± 0.010) 《Reproducibility》 0.000 ~ 2.000 O.D. : ± 1%(± 0.010)
Yes︓0 ~ 180 sec(2 kinds of speed)
Analysis mode / Calibration curve
Absorbance (1 wavelength setting only)) 《Quantitative analysis》Calibration curve︓Linear、Quadaratic、Cubic、Log、Exponential、Linear logarithmic、 point-to-point、4-parameters logistic 《Qualitativeanalysis》Cut-off formulation/Positive control/Negative control/Calibration control
PC connection: USB OS: Windows Condition setting, measurement, data storage, analysis by control software
Main body︓335 (W) × 305 (D) × 232 (H)mm ・ 7kg (AC adapter︓0.5kg)
Input Voltage・power consumption
AC adapter / CE marked
Input: AC100-240V, 50-60Hz, 140VA Output: DC24V, 65W Multimode microplate reader

bottom of page